*Corresponding Author:
C. Limmatvapirat
Department of Pharmaceutical Chemistry, Faculty of Pharmacy, Silpakorn University, Nakhon Pathom‑73000, Thailand
E-mail:
chutima@su.ac.th
Date of Submission 22 July 2015
Date of Revision 20 January 2015
Date of Acceptance 01 January 2014
Indian J Pharm Sci 2015;77(4):485-490  

This is an open access article distributed under the terms of the Creative Commons Attribution‑NonCommercial‑ShareAlike 3.0 License, which allows others to remix, tweak, and build upon the work non‑commercially, as long as the author is credited and the new creations are licensed under the identical terms.

Abstract

Eleven heavy metals in various products of Moringa oleifera were analyzed to determine eleven heavy metals (Al, As, Cd, Cr, Cu, Fe, Pb, Mn, Hg, Ni, and Zn) using Inductively Coupled Plasma-Mass Spectrometry. The products of M. oleifera were purchased in Nakhon Pathom, Thailand. All products were digested with nitric acid solution before determining the concentrations of heavy metals. The recoveries of all heavy metals were found to be in the range of 99.89-103.05%. Several criteria such as linearity, limits of detection, limits of quantification, specificity, precision under repeatability conditions and intermediate precision reproducibility were evaluated. Results indicate that this method could be used in the laboratory for determination of eleven heavy metals in M. oleifera products with acceptable analytical performance. The results of analysis showed that the highest concentrations of As, Cr, Hg, and Mn were found in tea leaves while the highest concentrations of Al, Cd, Cu, Fe, Ni, Pb, and Zn were found in leaf capsules. Continuous monitoring of heavy metals in M. oleifera products is crucial for consumer health.

Keywords

Moringa oleifera, Heavy Metals, Products, Leaves, ICP-MS

Moringa oleifera Lam. (family, Moringaceae and genus, Moringa) is a useful Thai plant. The leaf extracts have hypocholesterolemic [1] and hypolipidemic effects [2]. Additionally, the leaves have been reported to have antioxidant [3], hypoglycemic [4], and antiatherosclerotic activities [5]. The seed extracts showed antispasmodic, antiinflammatory and diuretic activities [6,7]. Furthermore, the seed extract has been shown to have ameliorative effect on liver fibrosis in rats [8]. A recent study of the nutritional value of M. oleifera leaves found that the dried leaves are composed of amino acids such as alanine, threonine, tyrosine, methionine, valine, phenylalanine, isoleucine, leucine, histadine, lysine, tryptophan, and cystine, fatty acids such as α‑linolenic acid, heneicosanoic acid, γ‑linolenic acid, palmitic acid, and capric acid, and several minerals such as calcium, phoshorus, magnesium, potassium, sodium, sulphur, zinc, copper, manganese, iron and selenium. Moreover, the leaves also reported to consist, vitamin A, vitamin E, β‑carotene, fiber, condensed tannins, and polyphenols [9]. The phytochemical investigation for bioactive compounds of M. oleifera seeds showed the presence of glycosides such as 4‑alpha‑L‑rhamn osyloxy‑benzylglucosinolate, niazimicin and niazirin, beta‑sitosterol and moringa oil [8]. In summary, the nutritional characterization of leaves and seeds from M. oleifera indicated that they are rich in nutrients and possess some medicinal properties. Therefore, leaves and seeds of M. oleifera were prepared for herbal medicines, dietary supplements, and functional drinks.

The popular uses of leaves and seeds from M. oleifera raise the question about safety and health of their products, especially due to the heavy metal concentrations. Daily exposure to heavy metals above the permissible limits has been associated with mental retardation, cancer, neuropathy, hepatic dysfunction and renal failure [10]. Our previous studies concerning the simultaneous analysis of heavy metals have determined the concentrations of eleven heavy metals including aluminum (Al), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), lead (Pb), manganese (Mn), mercury (Hg), nickel (Ni), and zinc (Zn) in raw leaves and leaf capsules of Moringa oleifera Lam. by using Inductively Coupled Plasma‑Mass Spectrometry (ICP‑MS) [11,12]. The results indicate that the concentrations of Al, As, Cd, Cr, Hg, Mn, Ni, and Pb in all samples of raw leaves as well as those of Al, As, Cr, and Hg in all samples of leaf capsules were within permissible limits and normal ranges. In contrast, the concentrations of Fe in all samples of raw leaves as well as those of Cu, Fe, and Zn in all samples of leaf capsules were higher than permissible limits. Furthermore, the concentrations of Cu and Zn in some samples of raw leaves as well as those of Cd, Mn, Ni, and Pb in some samples of leaf capsules were also higher than permissible limits and normal ranges. The overall conclusion is that samples of leaf capsules showed higher concentrations of Cd, Cu, Fe, Mn, Ni, Pb, and Zn compared to those in samples of raw leaves. Therefore, the present study was aimed at investigating the concentrations of those heavy metals in several commercial products made from leaves and seeds of M. oleifera. Finally, the results are compared with our previous reports.

The ultrapure water ASTM type I, 18.3 MΩ.cm resistivity, obtained by purifying distilled water with the TKA GenPure UltraPure Water Machine (TKA Wasseraufbereitungssysteme GmbH, Germany) was used for preparing all solutions. Nitric acid, an analytical reagent grade (lot K40352656 935), used for digestion was purchased from Merck, Darmstadt, Germany. An ICP multi‑element standard solution XIII (Lot HC813513, Agilent, USA) was diluted with 5% v/v nitric acid solution. Working standard solutions of heavy metals were freshly prepared. All glassware and plastic bottles were cleaned by soaking with 20% v/v nitric acid solution for at least 24 h and rinsed several times with 5% v/v nitric acid solution to eliminate surface contamination.

Samples of M. oleifera products (n=35), tea leaves, dried seeds, leaf capsules, leaf powders, and functional drinks were purchased from several selected occasional markets and grocery stores in Amphoe Mueang, Nakhon Pathom province, Thailand, during the period Sep 2011 to Mar 2012. All samples were kept in the Department of Pharmaceutical Chemistry, Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, Thailand. The dried samples were stored in a desiccator while the samples of functional drinks were stored in dry condition at room temperature in well‑closed containers.

The samples of tea leaves and dried seeds were grounded separately with an IKA MF‑10 Microfine Grinding Mill (Werke GmbH and Co. KG, Germany), equipped with a 0.5 mm pore size sieve and high‑grade stainless steel grinders. All powder samples were stored in a desiccator to protect them from moisture before digestion. The sample digestion procedure was performed according to previous reports [11,12]. Approximately 1 g of each sample was digested by adding 10.0 ml of 60% v/v nitric acid solution in a 100 ml Pyrex beaker covered with watch glass on a hot plate at 120‑130°. This mixture was heated until the solution was fully digested and clear. The clear digested solution was allowed to cool and then filtered. The digested filtrate was diluted to appropriate concentration with ultrapure water. The resulting digestate was analyzed using ICP‑MS. All samples were digested in triplicate. The resulting concentrations for all samples were calculated by determining the average of the triplicate measurements.

The concentrations of eleven heavy metals including Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn in resulting digestates were analyzed by an ICP‑MS spectrometer (Model 7500 ce, Agilent). The operating conditions and acquisition parameters are given in Table 1. Prior to analysis, instrument optimization was performed using standard solutions. The calibration curves were prepared from an ICP multi‑element standard solution XIII by diluting with 5% v/v nitric acid solution and storing as stock solutions. Working standard solutions were prepared daily in 5% v/v nitric acid solution.

Parameter Value
Auxiliary gas flow 0.89 L/min
Plasma gas flow 15 L/min
RF power 1500 W
Mass range 7–208 amu
Total acquisition time 260 s
MS analytical settings 20 sweeps/reading 1 reading/3 replicate 3 replicates
ICP‑MS: Inductively coupled plasma‑mass spectrometry, RF: radio frequency

Table 1: Icp‑Ms Operating Conditions and Acquisition Parameters

Heavy metal results from the ICP‑MS were quantified against standard curves generated from one blank (0 μg/l) and six different concentrations of standard reference solutions run separately. Quality control was assessed by running a laboratory reagent blank once after every five samples. The concentrations of eleven heavy metals were expressed in mg/kg of samples. The validation parameters such as linearity, limits of detection (LODs), limits of quantification (LOQs), specificity, precision under repeatability conditions and within‑laboratory reproducibility were examined. The procedures were performed under the European Standard for the analyses of heavy metals [13,14].

The validation of an analytical method was carried out to ensure reliability of the results. The results of regression analysis on calibration curves are presented in Table 2. Linearity was determined from the regression plots by the least squares method. The correlation coefficients (r2) of all calibration curves were between 0.9990 and 0.9998, showing good linear relationships over the ranges of heavy metal concentrations. Reagent blank determinations were used to correct the instrument readings.

Heavy metals Regression equations Correlation coefficients ( r2 )
As y=0.2947x+0.9358 0.9997
Cd y=0.3568x+0.1588 0.9995
Hg y=0.2547x+0.9581 0.9998
Pb y=0.3414x+0.8756 0.9998
Cu y=0.0987x+0.0016 0.9990
Fe y=0.0983x+0.0123 0.9992
Zn y=0.9578x+0.0369 0.9997
Al y=0.2458x+0.5692 0.9996
Cr y=0.3458x+0.0456 0.9996
Mn y=0.4597x+0.0165 0.9998
Ni y=0.6215x+0.3264 0.9996

Table 2: Results Of Regression Analysis On Calibration Curves

As shown in Table 3, the precision was expressed by the relative standard deviations (RSD) for n=10. The intraday repeatability (RSD, 0.126 to 0.843%) and interday reproducibility (RSD, 0.351 to 1.204%) exhibited the good precision. The LODs, LOQs, and recoveries of all heavy metals are shown in Table 4. The recovery and reproducibility of the method was estimated by spiking several already analyzed samples with varied concentrations of standard solutions of heavy metals and processed as previously described. The recoveries of all heavy metals were between 99.89 and 103.05%. The recoveries and RSDs listed were acceptable. This method is a useful tool for rapid determination of eleven heavy metals in M. oleifera products.

Heavy metals RSD, %
Intraday precision Interday precision
As 0.79 1.12
Cd 0.83 1.14
Hg 0.84 1.20
Pb 0.75 1.07
Cu 0.84 1.17
Fe 0.83 1.19
Zn 0.50 1.16
Al 0.83 1.20
Cr 0.13 0.35
Mn 0.57 0.78
Ni 0.45 0.56

Table 3: Rsd Of The Measurments

Heavy metals LOD (µg/l) LOQ (µg/l) Recovery (%)
As 3.36 9.93 101.56
Cd 1.22 3.56 103.05
Hg 3.39 10.06 102.69
Pb 4.45 13.13 101.05
Cu 1.56 4.57 99.89
Fe 3.55 9.96 100.06
Zn 2.08 6.12 100.23
Al 2.47 7.18 101.69
Cr 0.87 2.24 102.41
Mn 1.05 3.05 103.01
Ni 1.70 4.95 102.35

Table 4: Lod, Limits Of Quantification And Recoveries Of All Heavy Metals

The concentrations of eleven heavy metals (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) in M. oleifera products from this study are shown in Tables 5 and 6. The concentrations of As, Cd, Hg, Pb, Cu, Fe, and Zn in M. oleifera products are shown in Table 5. The ranking of toxic heavy metal concentrations in M. oleifera products was Pb>As>Cd>Hg while that of essential element concentrations was Fe>Zn>Cu. As shown in Table 6, the concentrations of Al (53.833‑564.168 mg/kg) and Cr (0.093‑2.631 mg/kg) from all analyzed samples were within the normal ranges (Al 1,000 and Cr 0.03‑14 mg/kg) prescribed by the previous reports [15,16], except for those of Ni (11.360‑115.417 mg/kg) from most of analyzed samples that showed the concentrations more than two times higher than the maximum level (5 mg/kg) [15,16]. Furthermore, the concentrations of Mn (92.301‑216.675 mg/kg) from some of analyzed samples (Table 6) were higher than the maximum level (90 mg/kg) [15,16].

Products The concentrations (mg/kg) of heavy metals
  As Cd Hg Pb Cu Fe Zn
Tea leaves              
Sample number 1 0.386 0.115 0.128 2.175 21.365 250.067 139.679
Sample number 2 0.186 0.075 0.057 2.156 7.442 201.823 81.866
Sample number 3 0.735 0.155 0.087 3.155 7.798 201.587 105.574
Sample number 4 1.574 0.182 0.054 3.285 6.915 324.286 113.406
Sample number 5 0.130 0.160 0.052 1.214 5.879 174.723 49.287
Sample number 6 0.333 0.080 0.366 2.328 10.680 372.398 59.093
Sample number 7 0.568 0.100 0.091 2.227 11.245 469.085 86.784
Sample number 8 0.123 0.068 0.050 1.175 3.015 115.352 41.326
Sample number 9 0.456 0.120 0.236 2.567 12.402 388.025 59.332
Sample number 10 0.598 0.135 0.298 2.893 12.691 396.230 61.028
Dried seeds              
Sample number 11 0.225 0.075 0.055 1.705 7.542 92.655 114.879
Sample number 12 0.380 0.141 0.065 1.235 4.234 223.130 55.831
Sample number 13 0.761 0.078 0.084 1.121 6.478 86.753 82.016
Sample number 14 0.402 0.152 0.068 1.212 4.325 220.120 56.320
Sample number 15 0.653 0.069 0.082 0.012 6.120 85.326 81.306
Leaf capsules              
Sample number 16 0.459 0.087 0.088 2.344 13.714 197.927 103.604
Sample number 17 0.180 0.102 0.171 1.548 28.294 168.549 87.442
Sample number 18 0.030 0.355 0.055 24.032 16.165 922.311 156.518
Sample number 19 0.028 0.277 0.056 8.860 13.747 569.412 133.592
Sample number 20 0.541 0.069 0.072 1.650 11.569 256.217 72.714
Sample number 21 0.646 0.126 0.060 1.902 6.529 317.988 74.354
Sample number 22 0.445 0.074 0.070 1.522 7.277 652.592 59.852
Sample number 23 0.523 0.068 0.069 1.563 10.986 154.236 71.265
Sample number 24 0.631 0.123 0.063 1.963 6.452 312.580 75.230
Sample number 25 0.493 0.598 0.068 1.426 7.023 593.951 55.639
Leaf powders              
Sample number 26 0.025 0.072 0.038 2.751 2.692 87.876 107.929
Sample number 27 0.189 0.069 0.051 1.591 3.126 37.831 57.010
Sample number 28 0.135 0.089 0.065 1.689 10.235 98.769 105.369
Sample number 29 0.129 0.102 0.087 1.987 12.369 102.360 104.256
Sample number 30 0.235 0.112 0.097 1.872 11.362 84.239 89.325
Functional drinks              
Sample number 31 0.012 0.056 0.023 0.501 3.201 102.359 42.356
Sample number 32 0.032 0.012 0.010 0.043 1.235 112.365 39.254
Sample number 33 n.d. n.d. n.d. 0.001 0.892 89.235 33.361
Sample number 34 0.056 0.023 0.018 0.005 2.012 98.236 47.012
Sample number 35 0.021 0.015 0.011 0.013 1.892 105.692 39.235

Table 5: Concentrations Of As, Cd, Hg, Pb, Cu, Fe, And Zn In Moringa Oleifera Products

Products The concentrations (mg/kg) of heavymetals
Al Cr Mn Ni
Tea leaves        
Sample number 1 256.221 1.604 62.086 42.833
Sample number 2 206.662 1.347 216.675 31.616
Sample number 3 182.419 0.893 77.047 13.992
Sample number 4 266.378 1.911 55.624 22.339
Sample number 5 248.715 0.505 63.803 12.612
Sample number 6 404.342 2.417 78.929 91.391
Sample number 7 409.831 1.429 104.526 32.427
Sample number 8 131.653 0.732 29.567 15.766
Sample number 9 425.362 2.498 89.362 86.325
Sample number 10 439.106 2.631 92.301 87.012
Dried seeds        
Sample number 11 53.833 0.566 19.854 9.631
Sample number 12 195.869 0.736 17.075 2.310
Sample number 13 61.424 0.282 11.970 5.968
Sample number 14 187.926 0.802 16.985 2.430
Sample number 15 60.897 0.236 10.981 5.813
Leaf capsules        
Sample number 16 246.548 1.043 45.613 2.973
Sample number 17 209.902 1.128 57.180 9.229
Sample number 18 290.017 1.291 143.133 56.829
Sample number 19 512.629 1.199 207.015 115.417
Sample number 20 263.584 1.204 124.272 12.175
Sample number 21 336.070 1.582 55.405 4.915
Sample number 22 564.168 1.766 148.692 3.937
Sample number 23 259.987 1.123 120.398 12.036
Sample number 24 326.281 1.495 54.398 4.890
Sample number 25 534.321 1.689 139.254 3.601
Leaf powders        
Sample number 26 286.208 2.425 53.332 8.361
Sample number 27 242.933 1.665 64.338 16.068
Sample number 28 277.365 0.754 78.356 33.564
Sample number 29 298.361 0.897 96.326 41.230
Sample number 30 302.560 1.235 79.235 56.234
Functional drinks        
Sample number 31 102.356 0.561 35.693 12.036
Sample number 32 99.325 0.689 29.365 14.910
Sample number 33 79.210 0.093 19.354 11.360
Sample number 34 89.356 0.108 30.290 23.026
Sample number 35 98.320 0.198 31.291 19.031
Normal ranges* 1000 0.03–14 50–90 0.02–5

Table 6: The Concentrations of Al, Cr, Mn, and Ni In Moringa Oleifera Products

Overview of Tables 5 and 6, the concentrations of As (<1.574 mg/kg), Cd (<0.182 mg/kg), Hg (0.010‑0.366 mg/kg), Pb (0.001‑3.285 mg/kg), Al (53.833‑439.106 mg/kg), and Cr (0.093‑2.631 mg/kg) from all analyzed samples of tea leaves, dried seeds, leaf powders, and functional drinks were fairly low and comparable to previous records [15,16]. Whereas the concentrations of Cu (6.452‑28.294 mg/kg), Fe (154.236‑922.311 mg/kg), and Zn (55.639‑156.518 mg/kg) from all analyzed samples of leaf capsules were higher than those found previously in 2010 [15,16]. The concentrations of Fe (37.831‑469.085 mg/kg), Zn (33.361‑139.679 mg/kg), and Ni (8.361‑91.391 mg/kg) from all analyzed samples of tea leaves, leaf powders, and functional drinks were also higher than those of 2010’s data [15,16]. Moreover, the concentrations of Fe (86.753‑223.130 mg/kg) and Zn (55.831‑114.879 mg/kg) from all analyzed samples of dried seeds were higher than those of 2010’s data [15,16].

To achieve the aim of this study, the method was developed for rapid determination of eleven heavy metals in M. oleifera products. For various products from M. oleifera the average concentrations of heavy metals decrease in the order: Al (255.718 mg/kg)>Fe (247.608 mg/kg)>Zn (78.373 mg/kg)>Mn (73.135 mg/kg)>Ni (26.408 mg/kg)>Cu (8.54 mg/kg)>Pb (2.449 mg/kg)>Cr (1.164 mg/kg)>As (0.362 mg/kg)>Cd (0.122 mg/kg)>Hg (0.087 mg/kg). Among M. oleifera products, tea leaves had the highest average concentrations of As (0.509 mg/kg), Hg (0.142 mg/kg), Cr (1.597 mg/kg), and Ni (43.6313 mg/kg) while leaf capsules had the highest average concentrations of Cd (0.188 mg/kg), Pb (4.681 mg/kg), Cu (12.176 mg/kg), Fe (414.576 mg/kg), Al (354.351 mg/kg), and Mn (109.536 mg/kg). Moreover, leaf powders had the highest average concentration of Zn (92.778 mg/kg). However, the concentrations of As (<1.574 mg/kg), Hg (<0.366 mg/kg), Al (53.833‑564.168 mg/kg), and Cr (0.093‑2.631 mg/kg) in all M. oleifera products were lower than those found previously in 2010 [15,16].

In addition, Tables 5 and 6 showed that the concentrations of heavy metals in M. oleifera products were higher than those in raw leaves when compared to our previous study [11]. The concentrations of heavy metals in leaf capsules as shown in Tables 5 and 6 were similar to those found in our previous report [12]. Prevalence of heavy metals in M. oleifera products especially elevated levels of As, Cd, Hg, and Pb, pose severe health risks to the consumers. Continuous monitoring of heavy metals in M. oleifera products is important for quality control of M. oleifera products.

Acknowledgements

This research work was supported by the Office of the National Research Council of Thailand (NRCT) and the Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, Thailand.

Financial support and sponsorship

This research work was supported by the Office of the National Research Council of Thailand and the Faculty of Pharmacy, Silpakorn University, Nakhon Pathom, Thailand.

Conflicts of interest

There are no conflicts of interest.

References