*Corresponding Author:
Seham Alzahrani
Department of Biological Sciences,
College of Science,
King Abdulaziz University,
Jeddah,
21589
Department of Biotechnology,
College of Science,
Taif University,
Taif 21944,
Saudi Arabia
E-mail:
seham.alzahrani@hotmail.com
This article was originally published in a special issue, “Modern Applications in Biomedical Research and Pharmaceutical Sciences”
Indian J Pharm Sci 2022:84(3)Spl Issue “42-53”

This is an open access article distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as the author is credited and the new creations are licensed under the identical terms

Abstract

Multidrug-resistant bacteria continue to pose the greatest threat to public health. Metallic nanoparticles are one of the more promising strategies for combating antibiotic resistance. This research aims to determine the effect of gold and silver nanoparticles and gold-silver alloy nanoparticles as antibacterial agents. On the other hand, biogenic synthesized gold and silver nanoparticles using Ziziphus spina-christi leaf extract and preparation of gold-silver alloy nanoparticles for treatment of multidrug-resistant bacteria were studied. The formation of nanoparticles was characterized using ultraviolet-visible spectrophotometer, fourier transforms infrared spectroscopy, X-ray diffraction and transmission electron microscopy. Antibacterial activity of the biosynthesized gold nanoparticles, silver nanoparticles and gold-silver alloy nanoparticles was studied against Klebsiella pneumoniae, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Acinetobacter baumannii and Enterococcus faecalis. In the present study, the minimum inhibitory concentration ranged from 61.33 to 64 μg/ml and the minimum bactericidal concentration of the silver nanoparticles ranged from 85.33 to 93.33 μg/ml against multidrug-resistant strains. Synthesized gold nanoparticles had no inhibition zone, indicating that silver nanoparticles have no negative effect on multidrug-resistant bacteria. Minimum inhibitory concentration of gold nanoparticles was in high concentration against multidrug-resistant strain was not bactericidal. The highest minimum inhibitory concentration of gold nanoparticles was 114 μg/ml. Finally, the minimum inhibitory concentration ranged from 53.33 to 62 μg/ml and the minimum bactericidal concentration of the gold-silver alloy nanoparticles ranged from 77.33 to 93.33 μg/ml against multidrug-resistant strains. These results indicate that gold-silver alloy nanoparticles showed higher antimicrobial ability when compared to silver nanoparticles and gold nanoparticles alone. Finally, the synthesized nanoparticles could be used as an alternative antimicrobial agent against multidrug-resistant bacteria, according to our findings.

Keywords

Silver nanoparticles, gold nanoparticles, multidrug-resistant bacteria, metallic nanoparticles

Since the beginning of nanotechnology, various Nanoparticles (NPs) synthesis methods have been observed and changed for the better. Many of these processes use hazardous chemicals, much energy and much heat to create NPs with limited properties. Green synthesis methods based on a microwave, sonochemical, electrochemical and hydrothermal methods, for example, have been developed to address this problem.

Green synthesis methods that use biological material sources such as plants, microbes and agricultural and industrial wastes have recently gained traction[1]. To a large extent, biological synthesis has been used to produce NPs of bimetallic or trimetallic alloys[2].

Silver (Ag) is a flexible, stronger than Gold (Au) natural element that is also a great insulator of thermal and electric energy[3]. Silver Nanoparticles (AgNPs) and their variants have a long history of medical applications[4]. Many studies have found a connection between AgNPs bactericidal activity and their ability to penetrate bacterial cell walls and alter membrane structure. Unchecked movement through the cell membrane and the eventual death of the bacteria result from this alteration in cell permeability. Other studies relate antimicrobial property to the generation of free radicals that damage membranes[5]. Researchers have discovered that the enzyme-activating thiol groups interact with AgNPs, which in turn prevents enzyme activation and cell division[6]. Another mechanism by which Ag ions are thought to interfere with protein translation is their binding to the ribosomal subunit 30S.

Aqueous solutions of Au contain no free ions because it is rigid and rare metal. Gold Nanoparticles (AuNPs) are non-toxic to human cells. AuNPs bactericidal activity does not promote the formation of Reactive Oxygen Species (ROS), which are the primary cause of bacterial cell death and this, is why they are effective against bacteria[7]. It has been found that AuNPs have no effect on bacterial growth or activity, but vancomycin-AuNPs conjugates reduce the number of growing bacterial cells. The antibacterial properties of vancomycincoated stable AuNPs were of considerable rise when compared to that of the free antibiotics[8].

Alloy NPs are made up of two or more metals that have properties like hardness, strength and durability in a homogeneous mixture[9]. For various applications, such as incorporating AgNPs with AuNPs, NPs must be combined with other materials. Due to this incorporation, their properties differ from those of monometallic NPs, such as the ability to catalyze, which is higher in alloy NPs than in monometallic NPs[10]. Alloy compounds have different structures and physical properties than their parent elements and possess superior characteristics to those of their parent elements. AgNPs-AuNPs, AgNPs-Copper Nanoparticles (CuNPs), AgNPs- Titanium Dioxide Nanoparticles (TiNPs) and AuNPs- Palladium Nanoparticles (PdNPs) are the most well- known bimetallic NPs. Optical, catalytic and electronic properties make them excellent choice bimetallic NPs are preferable to monometallic NPs. Grade et al. studies of the bactericidal effect of AgNPs-AuNPs alloy NPs on Staphylococcus aureus (S. aureus) using laser ablation drew more attention to the possibility of a new medical treatment field[11]. With the help of dextran solution, Dos Santos et al. synthesized an Ag-Au alloy with significant antimicrobial properties against a wide variety of biological growth, which could be used in medical equipment and antimicrobial agents[12].

AgNPs and AuNPs with desired morphology and size have been prepared using natural capping, reducing and stabilizing agents using green chemistry methods in recent years. Metallic Nanoparticles (MNPs) can be synthesized using biological methods rather than toxic, harsh and expensive chemical substances. Metal ion bioreduction is   a chemically complex but environmentally friendly process that uses polysaccharides, proteins and vitamins which are examples of biomolecules that can be found in certain organisms extracts. The most common method for producing green NPs is the use of plant extracts to synthesize MNPs. Furthermore, the plants have the distinct advantage of being widely distributed, readily available, much safer to handle, low cost, simple to scale up for huge synthesis and do not require the use of toxic chemicals, high pressure, temperature or energy and act as a source of several metabolites, as well as being a source of several metabolites[13].

Zizyphus spina-christi (Z. spina-christi) is a member of the Rhamnaceae family, which includes plants native to tropical Africa and Asia. Traditional medicine uses Z. spina-christi to treat inflammatory and pain- related ailments in areas where the plant is found. A local application of wood ash mixed with vinegar is recommended in the treatment of serpent bites. Fresh green leaf cataplasm is applied to swollen eyes before going to bed for abscesses and furuncles. Fruit infusions have been used to treat measles because they are emollients and laxatives[14]. Z. spina-christi leaf extract phytochemical analyses revealed the presence of phenolic, flavonoids, tannins, alkaloids and saponins. Because of the high concentration of Hydroxyl (OH)- groups in Z. spina-christi phytochemical compounds, these antibacterial and antioxidant properties are enhanced[15].

The emergence of Multidrug-Resistant (MDR) bacteria is a significant public health issue, necessitating the creation of new bactericidal materials. Many antimicrobial drugs face a major challenge because of pathogens acquired resistance[16]. Over 70 % of bacteria that cause infections in hospitals are resistant to at least one antibiotic, according to the World Health Organization (WHO) and some species are resistant to all approved antibiotics. The MDR isolates of S. aureus, Klebsiella pneumoniae (K. pneumoniae), Pseudomonas aeruginosa (P. aeruginosa), Enterococcus faecium (E. faecium), Enterobacter species and Acinetobacter baumannii (A. baumanii) cause 16 % of all healthcare associated infections, putting healthcare professionals on the defensive[17]. Bacteria are able to adapt to the selection pressure of antibiotics, resulting in their ability to develop and maintain antibiotic resistance. In addition, the variety of mechanisms for antibiotic resistance has risen in recent years[18].

Z. spina-christi extracts were used as a reducing and stabilizing agent for the biosynthesis of Au, Ag and Au- Ag alloy NPs in this study. AgNPs combined with Z. spina-christi leaf extract had a synergistic bactericidal effect on the biosynthesized Au-Ag alloy NPs. As an alternative to conventional antibacterial materials, this hybrid nanomaterial has been developed.

Materials and Methods

Plant collection and preparation of extract:

Fresh Z. spina-christi leaves were collected in the Al Shafa area of Taif, Saudi Arabia, during the summer. To make fresh aqueous extract plants, for 30 min at 80°, 25 g of thoroughly cleaned and finely chopped plants were sterilized in 100 ml of double-distilled water. The extract was filtered through Whatman filter paper no. 1 and kept at 4° for up to 1 w (fig. 1).

IJPS-leaf

Fig. 1: Z. spina-christi leaf extracts preparation

Biosynthesis of NPs using plant extract:

AgNPs biosynthesis: 1 ml of the prepared plant extract was added to 10 ml of 1 mM Silver Nitrate (AgNO3) with constant stirring at room temperature[19]. During exposure to plant extracts, Ag ions were reduced into AgNPs, resulting in the color change.

AuNPs biosynthesis: The Z. spina-christi extract (1 ml) was added to 25 ml of 1 mM Chloroauric Acid (HAuCl4 ) at room temperature for 20 min[20]. NPs had formed when the color of the solution changed from light yellow to red grape.

Biosynthesis of Au-Ag alloy NPs:

For Au-Ag alloys NPs synthesis, at room temperature, in 25 ml of deionized water, 1 mM AgNO3 and 1 mM HAuCl4 were dissolved. At a rate of 10 min, the reaction solution was heated to 90° while being stirred at 600 rpm. The solution was then injected with 25 ml Z. spina-christi extract. The solution was kept at 90° for 3 h before cooling to room temperature. The reaction mixture changed color from yellow to dark due to Au- Ag alloys[21].

Characterization of NPs:

Ultraviolet-Visible (UV-Vis) spectra: The formation of AuNPs, AgNPs and Au-Ag alloys was monitored using double-beam spectrophotometry using Z. spinachristi leaf extract at a resolution of 1 nm in the 300- 800 nm wavelength range[22].

Transmission Electron Microscopy (TEM): The microscopy technique known as TEM (Hitachi, H-7500) involves passing an electron beam through an ultra-thin specimen and interacting with it as it passes through. These NPs images of AuNPs, AgNPs and Au-Ag alloys NPs are the result of electrons passing through the specimen, which are magnified and focused on an imaging device[23].

X-Ray Diffraction (XRD) analysis: AuNPs, AgNPs and Au-Ag alloys NPs were examined using XRD to figure out their particle size and chemical composition. With 30 kV, 30 mA and Cu K radians at an angle of 2, the Shimadzu XRD-6100/6100 model was used. After the material was finely ground, the bulk composition of the analyzed material was determined. For the AgNPs and AuNPs, Debye Scherer’s equation was used to determine the particle or grain size[24].

Fourier Transform Infrared Spectroscopy (FTIR): To remove any loose moieties, centrifuge at 10 000 g for 20 min, the stabilized AuNPs, AgNPs and Au-Ag alloys solution was collected and dried thoroughly. The Shimadzu IR-470 spectrometer was used to conduct FTIR measurements on the AuNPs, AgNPs and Au- Ag alloys powder (Shimadzu, Japan). It has been determined that the FTIR peaks of the AuNPs and AgNPs were identified and expressed in wavenumbers (cm-1). A leaf extract from Z. spina-christi was also examined[25].

Characterization and isolation:

Clinical isolates collection and growth conditions: Urine and sputum specimens were collected from King Faisal Hospital, Taif, Saudi Arabia. For 24-48 h, the bacteria were incubated at 37° on Cystine Lactose Electrolyte Deficient (CLED) agar, Blood agar and MacConkey agar. Based on the colony morphology on blood and MacConkey agar, Gram-negative bacteria were identified through biochemical reactions like those for oxidase, Sulfide Indole Motility (SIM), Triple Sugar Iron (TSI), citrate and urease[26]. K. pneumoniae, Escherichia coli (E. coli), P. aeruginosa, S. aureus, A. baumannii and E. faecalis were found to be the most common bacterial isolates found in the samples. These bacterial strains were kept on Mueller-Hinton agar slants in the clinical laboratories during the antimicrobial efficacy study at a temperature of 4°  to maintain  viability.  At  a  temperature  of  37°,  bacteria were subcultured in Mueller-Hinton broth. 107 Colony- Forming Unit (CFU)/ml was the final concentration of the cell suspensions after diluting them with sterile saline solution, further efficacy of antimicrobials studies were carried out using AuNPs, AgNPs and Au- Ag alloys to investigate their antimicrobial properties.

Susceptibility testing for antibiotics: The Kirby- Bauer disc diffusion method on Mueller-Hinton agar was used to test bacterial isolates for antibiotic susceptibility according to Clinical and Laboratory Standards Institute (CLSI) guidelines[27]. 0.5 McFarland turbidity standards were used to grow it at 37°. Discs of antibiotics were added to a Mueller-Hinton agar plate for the bacterial culture. The CLSI guidelines were used to interpret the Zone of Inhibition (ZIN) on the plates after an overnight incubation period.

Antibacterial activity of AuNPs, AgNPs and Au-Ag alloys using agar diffusion method: This procedure was used to test the antimicrobial properties of the metal NPs against MDR bacteria[28]. The nutrient broth was used to grow the MDR bacteria at 37° overnight and grown MDR bacteria were then again subcultured into nutrient broth media and allowed to grow for another 2 h until the Optical Density (OD) was reduced to 0.01. On nutrient agar plates, 100 l of liquid culture were evenly distributed. An agar well borer was used to create wells with a diameter of 6 mm on agar plates and incubated at 37° with the AuNPs, AgNPs and Au-Ag alloys in the wells. The diameter of bacterial clearance after 16-24 h was used to calculate the ZIN.

Micro-dilution test for Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) determination: The test was carried out by inoculating bacterial culture into the wells of a microdilution plate and arranging antibiotic dilutions across the rows. Dilution tests can also be performed using individual tubes or plates in modern laboratories, but high-throughput plates were used in this experiment. A series of dilutions of antibiotic drug concentrations, with each concentration in a range being doubled from lowest to highest, were used to test for antibiotic efficacy. An in vitro test of the drug’s activity and bacterial resistance was required for the MIC to be helpful. Drug-resistant isolates have a lower MIC value. The MICs were calculated using serial two-fold dilutions of AgNPs ranging from 96 μg/ml to 8 μg/ml and AuNPs ranging from 114 μg/ml to 8 μg/ml. The concentrations are always given in mg/ml. MBC is the lowest concentration that can kill 99.9 % of microorganisms[29]. MBC is possible, but it is more complex than determining MIC. As a result, clinical laboratories rarely measure or report the MBC[30].

Statistical analysis:

Each activity assay was performed in triplicates. Oneway Analysis of Variance (ANOVA) in Statistical Package for the Social Sciences (SPSS) statistics program (IBM SPSS statistics 22) was used to evaluate the significance levels of results at p<0.05.

Results and Discussion

AgNO3 (1 mM) and Z. spina-christi leaf extract (25 %) were used to create AgNPs, which led to a color shift from yellow to brown, then dark brown, as depicted in the image above (fig. 2). AgNPs, which are formed when Ag salt is reduced, were responsible for the solution’s color change. Reducing and stabilizing agents allowed Ag ions to be reduced to AgNPs. The excitation of surface plasmon vibrations caused the yellowish-brown color of AgNPs in an aqueous solution. The color of the reaction mixture remained the same for about an hour after the color change was complete. So the reaction mixture’s AgNO3 concentration had been reduced drastically.

IJPS-extract

Fig. 2: Z. spina-christi leaf extract solution changes color over time when AgNO3 is added to it

Our findings corroborate those of SP et al.[31]. First, the absorption spectrum was produced by strong Surface Plasmon Resonance (SPR) or the resonant absorption of photons by AgNPs. Because the SPR band was affected by the refractive index of the solution and the size, the observed absorption band was size-dependent[32]. SPR of metal UV-Vis spectrometry that AgNPs are being formed has been confirmed, which revealed a sharp peak at 420 nm (fig. 3)[33].

IJPS-aunp

Fig. 3: AuNPs, AgNPs and Au-Ag alloys NPs UV-Vis spectra using Z. spina-christi leaf extract,

Fig. 4 shows that within 30 min of the Au salt solution’s addition to plant extract, the extracts color changed from colorless to wine red, indicating that AuNPs had formed. This is due to the molecular assistance of biological reducing agents found in the plant extract in the fabrication of AuNPs. The presence of reducing agents caused Au ions to be reduced to AuNPs. Natural reducing agents were found in Z. spina-christi leaf extract, which converted aqueous HAuCl4 solution to AuNPs. Due to the excitation of SPR, AuNPs showed a red grape color in an aqueous solution and showed a sharp peak at 550 nm (fig. 3)[34]. The observed absorption band was influenced by the solution’s size and refractive index, making the SPR band size-dependent[35].

IJPS-color

Fig. 4: The color of the solution changes over time by adding HAuCl4 to Z. spina-christi leaf extract

Z. spina-christi was used to successfully synthesize metallic NPs of Au, Ag and Au-Ag alloys NPs. Deionized water was used to dissolve 1 mM AgNO3 and 1 mM HAuCl4 in 25 ml. Following that, the reaction solution was brought to 90° by stirring it at 600 rpm for 10 min at a time. The solution was then injected with 25 ml Z. spina-christi extract. Before allowing the solution to cool to room temperature, it was kept at 90° for 3 h. Au-Ag alloys were formed and the reaction mixture turned dark yellow[35]. A UV-Vis spectrophotometer confirmed the formation of these MNPs (fig. 5).

IJPS-alloys

Fig. 5: Biosynthesis of Au-Ag alloys NPs

UV-Vis spectroscopy of AuNPs, AgNPs and Au-Ag alloys NPs was described below. The most common bimetallic NPs structures are alloys and core-shells, following the atoms intrinsic properties and their synthesis techniques. A structure can be determined by using the UV-Vis spectroscopy technique. SPR bands have been discovered in AuNPs and AgNPs, for example. For core-shell NPs, metal clusters separated into cores and shells typically show two distinct peaks in absorbance. Pure NPs have two absorption peaks, but the alloy NPs has a single absorption peak in the middle. Figure depicting each product’s UV-Vis spectra are shown (fig. 3). There was only one absorption peak between 413 and 545 nm in all samples (Ag or Au NPs). When the metal precursor’s mole fraction of Au reaches 50 % (i.e., the Au/Ag ratio is 1:1), an SPR peak appears at 425 nm.

A single SPR peak shift from AuNPs and AgNPs can be used to identify Au-Ag alloy NPs. For the bi-metallic alloy, a single SPR peak is expected, whereas two SPR peaks are expected if two individual metal NPs are physically mixed in the same condition. In a previous study, a shift in the SPR peak was observed[36] and other reports[37] for obtaining Au-Ag alloy NPs using Jasminum sambac (J. sambac) and Fusarium semictum (F. semictum) fungi extracts, respectively[38].

High-resolution TEM was used to examine the size and morphology of biosynthesized AgNPs with sizes ranging from 11.9 to 38.8 nm and a scale of 20 nm, as well as a histogram showing sizes of particles with spherical and hexagonal morphology[39]. TEM micrograph indicates the AuNPs were spherical and hexagonal (fig. 6). The synthesized AuNPs were formed in 14.64-32.95 nm in size. Our results were correlated to data obtained by Patil et al.[40]. The particles in the biosynthesized Au-Ag alloy were spherical and hexagonal, with an average size of 12.62-40.62 nm, according to TEM images (fig. 6)[41] diameter on average of 15 nm was found for individual AgNPs and AuNPs, suggesting that electron densities within the particle volume were more uniform. AgNPs were more dispersed than AuNPs, which were more aggregated and Au-Ag alloy.

IJPS-tem

Fig. 6: TEM images of biosynthesized, (1) AgNPs; (2) AuNPs and (3) Au-Ag alloy NPs with corresponding particle size distribution histograms

Au, Ag and Au-Ag alloy FTIR spectra are depicted in fig. 7. Identification of bioactive molecules for the stability of future generations of NPs through the reduction and bio-capping of MNPs was carried out using FTIR.

IJPS-ftir

Fig. 7: FTIR spectra of biosynthesized, (1) Extract; (2) AgNPs; (3) AuNPs and (4) Au-Ag alloy NPs

The FTIR analysis of AgNPs revealed two sharp absorption peaks at 1630 cm-1 and 3444 cm-1, indicating possible protein-AgNPs interaction. This peak, which corresponded to OH stretching or H-bonding for alcohol or phenols, was found at 3324 cm-1, indicating that OH bonding is enhanced during the formation of NPs. The amine peak was between 1630 and 1633 cm-1. The absorption peak of 1635.89 cm-1 is similar to that of proteins[42].

The above-mentioned functional groups are mostly derived from heterocyclic compounds, as indicated by the FTIR data and these are the water-soluble components of Z. spina-christi. As a result, watersoluble compounds like phenolic, alcohol and amines may act as capping agents in the synthesis of AuNPs, as well as aiding in NPs stabilization under physiological conditions. The capping and stabilization of AuNPs have been attributed to hydroxyl groups and amines[43].

To the presently formed phyto-mediated NPs, an FTIR analysis was performed. The active biomolecules found in plant leaves include amides, hydroxyls, ketones, ethers, alkyls and other functional groups that have previously been reported[44]. The FTIR spectra of AuNPs, AgNPs and Ag-Au NPs have been published and possible peaks from the biomolecules responsible for photosynthesized NPs reduction, capping and efficient stabilization have been identified.

According to the FTIR data, the different functional groups mentioned above are mostly derived from heterocyclic compounds and these are the watersoluble components of Z. spina-christi. As a result, water-soluble compounds such as phenolic, alcohol and amines may act as a capping agent in the synthesis of AuNPs, aiding in NPs stabilization under physiological conditions. Hydroxyl groups and amines are thought to be responsible for the capping and stabilization of AuNPs[45].

Fig. 8 shows the Au, Ag and Au-Ag alloy NPs synthesized in a biosynthetic manner. As metals with similar lattice constants, the two values of Au-Ag alloys are very close. The four intense peaks are found at 2θ=37.51º, 44.12º, 64.00º and 76.91º, which correspond to (111), (200), (220) and (311), respectively and can be indexed using the facets of AuNPs and AgNPs facecentered cubic crystal structure. The bimetallic Au-Ag alloys reflections are identical to the monometallic Au and Ag NPs. Using the Scherrer equation, the mean sizes of these NPs were calculated to be 2430 nm based on the line width of the maximum intensity reflecting peak.

The Debye-Scherrer formula is used to calculate the average crystalline size.

D=Kλ/β cos θ

Where K is Scherrer constant, λ is the wavelength of X-ray, θ is the Braggs angle in radians and beta (β) is the full width at half maximum of the peak in radians.

A geometric factor of (0.9), the XRD source’s wavelength and the angular Full-Width at Half Maximum (FWHM) of the XRD peak at the angle of diffraction θ are used to calculate D, the average crystalline size of NPs (fig. 8).

IJPS-xrd

Fig. 8: XRD analysis of biosynthesized, (1) AgNPs,

In our results of the XRD spectrum of the biosynthesized NPs, the D and 2θ values of Au and Ag NPs have similar lattice constants. Au-Ag alloys are very similar. However, the four intense peaks are observed at 2θ=37.51º, 44.12º, 64.00º and 76.91º corresponding to (111), (200), (220) and (311), which can be indexed according to the facets of the face-centered cubic crystal structure of Au and Ag NPs[46]. The Au-Ag alloy’s reflections are identical to the monometallic NPs of Au and Ag. Based on the line width of the maximum intensity reflecting peak, the mean sizes of these NPs were calculated to be 25-30 nm using the Scherrer equation[38].

The bacterial strains K. pneumoniae, E. coli, P. aeruginosa, S. aureus, A. baumannii, E. faecalis were isolated from urine and sputum. Antimicrobial agent sensitivity testing was performed on the bacterial isolates found in urine and sputum. The antimicrobial MICs of these bacterial strains were tested against each other (Table 1).

Bacterial isolates Antibiotic resistance pattern Number of antibiotics Sources
K. pneumoniae AK, AMP, AMC, ATM, FEP, FOX, CAZ, CRO, CXM, CEF, CIP, ETP, GEM, IPM, LVX, MEM, NTF, TZP, SXT 19 Urine
E. coli AK, AMP, ATM, FEP, CAZ, CRO, CXM, CEF, CIP, GEM, LVX, SXT 12 Urine
P. aeruginosa AK, AMP, AMC, ATM, FEP, FOX, CAZ, CRO, CXM, CEF, CIP, ETP, GEM, IPM, LVX, MEM, NTF, TGC, SXT 19 Urine
S. aureus AMP, ATM, CTX, CEC, GEM, IPM, CIP, OXA, PEN 9 Sputum
A. baumannii AK, AMP, AMC, ATM, FEP, FOX, CAZ, CRO, CXM, CEF, CIP, ETP, GEM, IPM, LVX, MEM, NTF, TZP, SXT 19 Sputum
E. faecalis CTX, FOX, CEC, CLI, ERY, GEM, IPM, CIP, TET, SXT 10 Urine

Table 1: Patterns of resistance to MDR bacteria found in urine and sputum isolates

The results obtained have been interpreted following the CLSI guidelines. First, as presented in Table 1, the isolates of K. pneumoniae were resistant to 19 antimicrobials and isolates of E. coli were resistant to 12. Moreover, isolate P. aeruginosa was resistant to 19 antibiotics and isolates S. aureus was resistant to 9. Also, isolate A. baumannii was resistant to 19 antibiotics and isolates E. faecalis was resistant to 10. According to Matsushita and Janda[47], many bacterial strains have mobile components that encode antibiotic resistance and can be transferred between them or even between different species by horizontal or vertical gene transfer. Other mechanisms of resistance could be caused by chromosomal Deoxyribonucleic Acid (DNA) mutation. According to the findings, bacteria’s rapid growth rate and the absolute number of cells reached mean, that resistance develops quickly in a population with high infection rates[47]. The antibiogram of these isolates showed high resistance rates to critically essential antibiotics, which WHO classifies, making these infections hard to treat by many classes of antibiotics (β-lactamase, cephalosporins, aminoglycosides, fluoroquinolones and lincosamides)[48].

K. pneumoniae, the most common cause of nosocomial infection-related mortality and morbidity, has a high rate of resistance that can spread into the general population, making treatment more difficult[49]. The findings revealed high levels of resistance to commonly used antimicrobials. Mutations that alter the expression and function of chromosomally encoded mechanisms can lead to antibacterial resistance in P. aeruginosa; alternatively, the bacteria can acquire resistance genes on mobile genetic elements (plasmids)[50]. Extended Spectrum Beta-Lactamase (ESBLs) or AmpC-type cephalosporins and uncommon carbapenemases, which are plasmid and integron-mediated antimicrobial resistance determinants, are commonly produced by MDR strains of A. baumannii[51]. Their prevalence is relatively high in some settings[52].

Micro-dilution plates and a suitable diffusion assay are used. The antibacterial properties of synthesized NPs were tested against several MDR bacterial pathogens. ZIN, MIC and MBC are the diameters of the ZIN in millimeters (Table 2, Table 3 and fig. 9).

Mean ZIN (mm) (Mean±SD)
Test Samples Au NPs Ag NPs Au-Ag NPs Standard (Cefepime)
Concentration (µg/ml) 100 100 100 20
K. pneumoniae 00.00±0.00 14.67±0.58 15.67±0.58 17.33±0.58
E. coli 00.00±0.00 16.67±0.58 18.33±0.58 17.33±0.58
P. aeruginosa 00.00±0.00 14.33±0.58 15.33±0.58 15.67±0.58
S. aureus 00.00±0.00 16.33±0.58 16.67±0.58 19.33±0.58
A. baumannii 00.00±0.00 15.67±0.58 17.67±0.58 19.33±0.58
E. faecalis 00.00±0.00 17.33±0.58 18.33±0.00 16.33±5.51

Table 2: Biosynthesized Au, Ag and Au-Ag alloy NPs have antibacterial properties against MDR pathogenic strains was compared to that of a standard drug

Test Samples Au NPs Ag NPs Au-Ag NPs
Concentration (µg/ml) 1MIC90 2MBC 1MIC90 2MBC 1MIC90 2MBC
K. pneumoniae 108±0.00 3ND 64±0.00 88±0.00 62±5.20 80±0.00
E. coli 108±0.00 ND 64±0.00 88±0.00 61.33±4.62 88±0.00
P. aeruginosa 114±0.00 ND 61.33±4.62 93.33±4.62 61.33±4.62 93.33±4.62
S. aureus 112±3.46 ND 61.33±4.62 85.33±4.62 53.33±4.62 77.33±4.62
A. baumannii 104±3.46 ND 61.33±4.62 93.33±4.62 56±0.00 77.33±4.62
E. faecalis 108±0.00 ND 64±0.00 88±0.00 56±0.00 82.67±4.62

Table 3: MIC90 and MBC values of Au, Ag and Au-Ag alloy NPs against pathogenic K. pneumoniae strains

IJPS-activity

Fig. 9: Activity of AgNPs against, (1) K. pneumoniae; (2) E. coli; (3) P. aeruginosa; (4) S. aureus; (5) A. baumannii and (6) E. faecalis

The antimicrobial activity of NPs was investigated against MDR pathogenic K. pneumoniae, E. coli, P. aeruginosa, S. aureus, A. baumannii, E. faecalis strains using agar disk diffusion and microdilution plate methods. E. faecalis was found to have the largest ZIN (17.33 mm) of the AgNPs, while P. aeruginosa was found to have the minor ZIN (14.33 mm). There was a range of 61.33 to 64 μg/ml of MIC and 85.33 to 93.33 μg/ml of MBC for AgNPs against MDR bacteria. Data from this study agree with those found by Jyoti et al.[53]. In this study, synthesized AuNPs had no ZIN, indicating that AuNPs have no adverse effect on MDR bacteria. MIC of AuNPs was in high concentration against MDR was not bactericidal. The highest MIC of AuNPs was 114 mg/ml against P. aeruginosa strains. Finally, the ZIN of Au-Ag alloy NPs was found to be highest (18.33 mm) against E. coli and E. faecalis and lowest (15.33 mm) against P. aeruginosa, the MIC ranged from 53.33 to 62 μg/ml and the MBC of the Au-Ag alloy NPs ranged from 77.33 to 93.33 μg/ml against MDR strains.

In our results, biosynthesis AgNPs showed an antibacterial effect against MDR bacteria (E. coli, S. aureus, Methicillin-Resistant S. aureus (MRSA), A. baumannii, P. aeruginosa, E. faecalis, K. penumonaie). Previous studies that looked at AgNPs antibacterial activity yielded similar results[53].

The mechanism of the AgNPs inhibitory action on MDR bacteria is still unknown. The small AgNPs synthesized by Z. spina-christi leaf extract could explain the antibacterial activity. Sulfur and phosphorus components (proteins and DNA) in the cytoplasm could react with Ag ions released from AgNPs, resulting in a decrease in DNA replication and cell viability. This was confirmed by TEM analysis of cell membrane rupture, which showed that small AgNPs with an extensive surface area provided larger NPs which have better contact and interaction with bacteria. The thiol group of enzymes, such as Nicotinamide Adenine Dinucleotide Hydrogen (reduced) (NADH) dehydrogenases, could interact with Ag ions and disrupt the respiratory chain. AgNPs also generated free radicals, which oxidized cells and caused cell death[54,55].

In this study, AuNPs showed no ZIN against test MDR bacteria and fragile antibacterial activity at a high concentration of AuNPs[56]. However, researchers have found that AuNPs are ineffective or only mildly bactericidal at high concentrations. Furthermore, an efficient drug delivery/carrier system based on AuNPs with specific physicochemical properties has been widely accepted because of their simple and wellstudied syntheses, ease of surface functionalization and biocompatibility and low toxicity[57].

Functionalized phytochemicals because of the combination of plant extract, Au and Ag metals, Au-Ag alloy NPs have a more significant ZIN than AuNPs and AgNPs alone[38]. A previous study[58] discovered that Au-Ag alloy NPs have a larger ZIN than AuNPs and AgNPs alone.

In conclusion, this research suggests a new approach to dealing with MDR bacteria-related infections using Z. spina-christi leaves extract, a green strategy for the rapid biosynthesis of Au, Ag and Au-Ag alloy NPs has been developed. This extract contained reducing, stabilizing and capping agents for the biosynthesis of NPs containing Au, Ag and Au-Ag alloy. A UV-Vis spectroscopy analysis showed that NPs formed at 413 nm for AgNPs, 545 nm for AuNPs and 425 nm for the Ag-Au alloy. The XRD analysis confirmed that the synthesized Au, Ag and Au-Ag alloy NPs were Face-Centered Cubic (FCC) phases. Under optimum conditions, the particles are spherical and hexagonal and have a narrow size distribution with 11.9-40.62 nm diameters.

Furthermore, higher Gram-negative and Grampositive bacterial growth inhibition biological potential compared to Au, Ag and Au-Ag alloy NPs. In conclusion, Au, Ag and Au-Ag alloy NPs prepared using the environmentally friendly and cost-effective method described here have been predicted to be potential antioxidants, antimicrobials and anticancer agents. In addition, the use of phytochemically functionalized MNPs could result in significant advances in a variety of material science and biology fields.

Acknowledgements:

The authors thank the Science and Technology Unit, the Deanship of Scientific Research and the Deanship of Graduate Studies at King Abdulaziz University (KAU) in Jeddah, Saudi Arabia, as well as the Department of Biological Sciences for its support and the Department of Biotechnology, Faculty of Science, Taif University, Taif, Kingdom of Saudi Arabia.

Conflict of interests:

The authors declared no conflict of interest.

References